|
|
|
| SLOTTED WEIGHTS AND CARRIER |
|
BRASS CONSTRUCTION WITH OR WITHOUT CHROME PLATED.EACH
SET CONSISTS OF NINE WEIGHT AND A CARRIER OF SAME WEIGHT
UPTO 10 KG.
ALSO AVAILABLE WITH FOUR WEIGHTS AND A CARRIER OF SAME
WEIGHT.
| SET OF
WEIGHTS (EACH WEIGHT )
|
TOTAL
WEIGHT |
10 GM |
100 GM |
20 GM |
200 GM |
50 GM |
500 GM |
100 GM |
1000 GM |
ALSO AVAILABLE IN IRON AND CAN ALSO BE AS PER REQUIREMENT
,SPARE SLOTTED WEIGHTS AND HANGER ARE ALSO AVAILABLE.
|
| Prod
ID: SWC-4101 |
| SAND BAGS |
|
| CONSTRUCTED OF STRONGLY STITCHED CANVAS ,UPPER EDGE
HAS SHORT LENGTH UNSEWN FOR FILLING TO MAKE SAFE OF 5
, 10 , 20 ,& 30 NEWTON OR GRAMS WITH DRY SAND &
EYELET AT TOP |
| Prod
ID: SB-4102 |
| PULLEYS , ALUMINIUM &
PLASTIC |
|
50 MM DIAMETER PULLEY MOUNTED IN FRAME WITH HOOKS.
| TYPE
, ALUMINIUM
|
TYPE ,
PLASTIC |
SINGLE |
SINGLE |
DOUBLE IN LINE |
DOUBLE IN LINE |
DOUBLE IN PARALLEL |
DOUBLE IN PARALLEL |
TRIPLE IN LINE |
TRIPLE IN LINE |
TRIPLE IN PARALLEL |
TRIPLE IN PARALLEL |
|
| Prod
ID: PAP-4103 |
| PULLEY ,SINGLE ,BENCH MOUNTING |
|
| 50 MM DIAMETER ALUMINIUM PULLEY IN METAL FRAME FOR CLAMPING
TO BENCHES OR BOARDS UPTO 25 MM THICK |
| Prod
ID: PSB-4104 |
| PULLEY, DIFFERENTIAL |
|
| TRIPLE PULLEY OF ALUMIMUM CAST IN ONE PIECE WITH DIAMETER
38, 50 & 62 MM IN METAL FRAME AND HOOK. |
| Prod
ID : PD-4105 |
| PULLEY , ROD TYPE |
|
| ALUMINIUM PULLEY 38 MM DIAMETER , MOUNTED ON LIGHT ALLOY
ROD 10 MM DIA , 150 MM LONG . |
| Prod
ID : PR-4106 |
| PULLEY , BOARD MOUNTING |
|
| ALIMINIUM PULLEY 22 MM DIAMETER IN METAL BRACKET WITH
MOUNTING PLATE. |
| Prod
ID : PB-4107 |
| PULLEY BLOCK , MIDGET HOIST
|
|
| TESTED TO 680 KGS ,FOR SAFE WORKING LOAD OF 225 KG ,TWO
FOUR BLOCK LUBRICATION WHEELS ,SAFETY HOOKS AT TOP AND
BOTTOM AND AUTOGRIP DEVICE. |
| Prod
ID : PM-4108 |
| LEVER KIT |
|
TO PROVIDE A SIMPLE 'SEE-SAW' FOR EXPERIMENTS ON BALANCING
MASSES ,LEADING TO THE PRINCIPLE OF THE LEVER. COMPRISES
FIVE WOOD BEAMS APPROXIMATELY 610 X 44 MM GRADUATED AT
38 MM INTERVALS, FOUR
U-SHAPED SUPPORTS , GROOVED TO LOCATE FULCRUM PINS , 40
BRASS PENNY-WEIGHTS 25 X 25 X 2 MM AND 20 FULCRUM PINS.
|
| Prod
ID : LK-4109 |
| HARD WOOD LEVER & S-HOOKS
|
|
ONE METER LONG RULE ,ONE SIDE DIVIDED IN CENTIMETERS
AND MILLIMETERS AND OTHER SIDE IN INCHES AND TENTHS .
DRILLED EVERY 100 MM WITH
S-HOOKS. |
| Prod
ID : HS-4110 |
| S- HOOKS |
|
| FOR ATTACHING TO CORDS FOR LIFTING OF VARIOUS ITEMS. |
| Prod
ID : PMSH-41101 |
| SIMPLE WHEEL AND AXLE |
|
| COMPRISES TWO GROOVED HARD WOOD WHEELS 150 X 75 MM DIAMETER
RESPECTIVELY WITH METAL MOUNTING PIN. |
| Prod
ID : SWA-4111 |
| COMPOUND WHEEL AND AXLE
|
|
| WITH ALUMINIUM ALLOY BLOCK COMPRISING WHEEL ,100 MM
DIAMETER AND AXLES 50 MM AND 25 MM DIAMETER,MOUNTED ON
ADJUSTABLE STEEL CONES IN STEEL FRAME,MOUNTED ON WOODEN
BOARD WITH FOUR HOLES FOR WALL MOUNTING,COMPLETE WITH
5 METERS NYLON CORD AND STEEL HOOK . |
| Prod
ID : CWA-4112 |
| METAL FLY WHEEL |
|
| APPROXIMATELY 200 MM DIA BY 44 MM WIDE WHEEL, MOUNTED
ON A BALANCED HORIZONTAL SHAFT IN METAL BRACKET ,WITH
FOUR HOLES FOR WALL MOUNTING. |
| Prod
ID : MFW-4113 |
| LINEAR AIR TRACK |
|
TRIANGULAR SECTION ALLOY TRACK,LENGTH 255 CM ,WITH STAGGERED
AIR HOLES .SUPPORTED ON TWO LIGHT ALLOY CASTINGS POSITIONED
45 CM FROM EACH END OF THE TRACK.ONE SUPPORT HAS A TWO
POINT CONTACT AND OTHER A ONE POINT CONTACT FOR LATERAL
AND HORIZONTAL ADJUSTMENTS FOR WHICH A KNURLED SCREW IS
PROVIDED .LARGE CATAPULT ARMS WITH SLOTS FOR ELASTIC BANDS
ARE FITTED TO EACH END OF THE TRACK.A PULLEY FITTED TO
ONE END OF THE TRACK ENABLES EXPERIMENTS INVOLVING ACCELERATION
UNDER A CONSTANT FORCE TO BE INVESTIGATED.IDENTICAL END
CAPS ENABLE AIR TO BE INTRODUCED FROM EITHER END OF THE
TRACK,BUNG BEING SUPPLIED TO CLOSE THE END NOT BEING USED.
THE VEHICLES BUFFER ATTACHMENTS AND CLAMPING SCREWS ARE
MATT BLACK TO HELP INTERPRETATION OF STROBOSCOPIC PHOTOGRAPHS.
: ACCESSORIES :
CENTI SECONDS TIMER
PHOTOTIMING GATE
XENON STROBOSCOPE
HAND HELD STROBOSCOPE
ACCESSORIES KIT
AIR BLOWER
SMALL VEHICLE
LARGE VEHICLE |
| Prod
ID : LAT-4114 |
| LINEAR AIR TRACK ACCESSORIES
KIT |
|
SUPPLIED
COMPLETE WITH , 2 LARGE VEHICLES
( MASS 400 GM, LENGTH 215 MM )
1 SMALL VEHICLE ( MASS 200 GM , LENGTH 100 MM )
2 MAGNETIC BUFFERS ( 25 MM DIA )
2 PLASTICINE HOLDERS ( 20 MM DIA ) WITH CENTRAL HOLE.
4 CATAPULTS ( 45 MM WIDE ) WITH SLOT FOR ELASTIC BAND.
3 STEEL BUFFERS WITH CENTRAL HOLE.
4 ELASTIC CORDS ( 220 MM LONG ) WITH PLASTIC RINGS.
1 REEL OF NYLON THREAD .
2 WHITE PLASTIC RODS ( 4 MM DIA 150 MM LONG ) FOR STROBOSCOPIC
PHOTOGRAPHY
24 NEEDLES FOR USE WITH STEEL BUFFER .
20 WHITE
PLAIN CARDS FOR INTERRUPTING LIGHT BEAMS.
1 REEL RUBBER STRAND
1 PACK OF PLASTICINE
20 ELASTIC BANDS
QTY |
ITEMS |
| 1 |
SMALL VEHICLE ( MASS 200 GM , LENGTH 100 MM
) |
| 2 |
MAGNETIC BUFFERS ( 25 MM DIA ) |
| 2 |
PLASTICINE HOLDERS ( 20 MM DIA ) WITH CENTRAL
HOLE. |
| 4 |
CATAPULTS ( 45 MM WIDE ) WITH SLOT FOR ELASTIC
BAND. |
| 3 |
STEEL BUFFERS WITH CENTRAL HOLE. |
| 4 |
ELASTIC CORDS ( 220 MM LONG ) WITH PLASTIC RINGS.
|
| 1 |
REEL OF NYLON THREAD . |
| 2 |
WHITE PLASTIC RODS ( 4 MM DIA 150 MM LONG )
FOR STROBOSCOPIC PHOTOGRAPHY |
| 24 |
NEEDLES FOR USE WITH STEEL BUFFER . |
| 20 |
WHITE PLAIN CARDS FOR INTERRUPTING LIGHT BEAMS.
|
| 1 |
REEL RUBBER STRAND |
| 1 |
PACK OF PLASTICINE |
| 20 |
ELASTIC BANDS |
| 1 |
INSTRUCTION MANUAL. |
THE KIT ENABLES THE AIR TRACK TO BE USED TO ITS FULL POTENTIAL,
PROVIDING MOST OF THE NECESSARY EQUIPMENT TO PERFORM THE
EXPERIMENTS DETAILED IN THE COMPREHENSIVE INSTRUCTION
MANUAL |
| Prod
ID : LATA-4115 |
| AIR BLOWER |
|
SUITABLE FOR USE WITH LINEAR AIR TRACK ,WITH A FLEXIBLE
HOSE TERMINATING IN A TAPERED ADAPTOR.
POWER SUPPLY 230 V, AC 50HZ. |
| Prod
ID : AB-4116 |
| FOOT PUMP |
|
| A VERY CONVIENT AIR PUMP USED IN LABORATORY FOR VARIOUS
APPLICATIONS. |
| Prod
ID : PMFP-41162 |
| STROBOSCOPE , MANUAL &
DIGITAL |
|
A HIGH QUALITY STROBOSCOPE TO COVER THE
REQUIREMENTS OF VARIOUS LEVELS OF STUDY , FEATURES HIGH
ACCURACY WITH MANUAL AND DIGITAL READOUTS.SPECIALLY DESIGNED
, COMPACT & ENCHASED IN PLASTIC CASE.
TECHNICAL SPECIFICATIONS :
|
DESCRIPTION |
|
MODEL. BSM-2000, MANUAL |
MODEL. BSD-2001, DIGITAL |
| VOLTAGE |
: |
220V,50HZ |
220V,50HZ |
| FLASH TUBE |
: |
XENON LONG LIFE STECKBAR |
XENON LONG LIFE STECKBAR |
| LIGHT INTENSITY |
: |
MAX 350 LUX |
MAX 350 LUX |
| FLASH DURATION |
: |
7 US |
7 US |
| DISPLAY |
: |
BY TURNING KNOB |
LCD DISPLAY |
| FREQUENCY RANGE |
: |
2,5….300HZ=150…..18000 1/MIN |
| RANGE DIVISION |
: |
2,5…66,6HZ=150…4000/MIN/61,6…300HZ-3700…18000/MIN |
*NOTE : FREQUENCY RANGE & RANGE
DIVISION IS SAME IN BOTH THE MODELS |
| Prod
ID : SMD-3715 |
| FOOT PUMP |
|
USED WHEREVER MOTION SEQUENCES HAVE TO
BE ANALYSED OR ROTATION SPEEDS HAVE TO BE MEASURED .SEPARATE
CONTROL UNIT AND HAND HELD LAMP.SUITABLE FOR CONTINIOUS
OPERATION.BRIGHT LIGHT INTENSITY MAKES MEASURING POSSIBLE
ALSO BY DAY LIGHT,VOLTAGE & FREQUENCY OUT PUT, EXTERNAL
TIGGERING VIA PHOTO EMITTER INDUCTIVE SENSOR OR EXTERNAL
TIGGERING SIGNAL FOR OBSERVATION OF IRREGULAR MOTION SEQUENCES
, MEASURING OF ROTATION SPEED , FREQUENCY AND PERIOD LENGTH
DIRECT READING IN THE REQUIRED UNIT,NO CONVERSATION NECESSARY.
TECHNICAL SPECIFICATIONS :
| OPERATING VOLTAGE |
: |
220C AC ,50HZ |
| RANGE |
: |
20000 RPM |
| FLASHING FREQUENCY |
: |
330 HZ |
| PERIOD |
: |
3-300 MS |
| TYPE OF TUBE |
: |
XENON TUBE |
| LIGHT INTENSITY |
: |
2400 LUX |
| ACCURACY |
: |
+/- 1 DIGIT |
| INDICATION AND MEASURING RANGES |
: |
RPM - 200-20000
HZ - 3-33-HZ
MS - 3-300 MS |
| INTERNAL TRIGGERING |
: |
RANGE 1 - 200 - 4000 RPM
RANGE 2 - 1000 - 20000 |
| EXTERNAL TRIGGERING |
: |
SYNCHRONOUS WITH MAINS OPTICAL EMITTER WITH
SWITCH -OVER TO BRIGHT OR DARK MARKINGS, INDUCTIVE
EMITTER WITH SWITCHOVER TO GEAR WHEEL OR APERTURE
DISK. LOGICAL SIGNAL , ALTERNATING CURRENT |
| OUT PUTS-FREQUENCY |
: |
LOGIC SIGNAL 15 v / 40 MA |
| VOLTAGE |
: |
30MV / HZ , LINEARITY 5% |
| INPUTS |
: |
GATE TO EXTERNAL TRIGGERING OF THE HANDLAMP
( ON / OFF OR SINGLE FLASH TRIGGERING ). |
|
| Prod
ID : SDH-3716 |
| STROBOSCOPE , HAND |
|
| MATT BLACK FINISH,250MM DIA,WITH 12 RADIAL SLOTS EXTENDING
TO ITS EDGE AND FINGER HOLE . ROTATES ON HANDLE. |
| Prod
ID: SH-3717 |
| PHOTO TIMING GATE |
|
USED AS A LIGHT OPERATED TIMING GATE ,IT CONSISTS OF
A PHOTO DETECTOR AND LIGHT SOURCE ( 2.5 V , 0.2 A BULB
) HOUSED IN TWO PLASTIC CASES HELD 40 MM A PART ON A METAL
ROD ,4 MM SOCKET ARE PROVIDED FOR CONNECTING IT TO THE
ELECTRONIC TIMER.
POWER SUPPLY :- 2 V/ AC. |
| Prod
ID: PTG-4120 |
| DYNAMICS TROLLEYS |
|
| A PAIR OF IDENTICAL WOODEN TROLLEYS ( 300 MM LONG )
MOUNTED ON THREE WHEELS. A SPRING LOADED ROD IS FITTED
TO GIVE IMPULSE WHEN RELEASED. IT HAS A PROVISION FOR
STACKING THE TROLLEYS ON TOP OF EACH OTHER WITH REMOVABLE
PINS.COMPLETE WITH 3 ELASTIC CORDS , 3 SPRINGS , 8 PINS
( FOR STACKING ), 2 RUBBER CORKS , 2 NEEDLES & 1 RELEASING
PIN.A WOODEN TRACK 2 METER LONG COLLAPSABLE .THE TRACK
PROVIDES AN EASILY INCLINABLE SMOOTH SURFACE . |
| Prod
ID : DT-4121 |
| TICKER TAPE TIMER A.C.
|
|
OPERATES ON 12V AC .THE TIMER EMPLOYS ELECTROMAGNET
WITH SPRING LOADED ARMATURE WHICH VIBRATES ABOVE A SUPPORT
TABLE FOR A CARBON PAPER DISC, PAPER TAPE,DRAWN THROUGH
GUIDES ON THE TABLE ,IS STRUCK BY A DOTTING SCREW CARRIED
ON THE ARMATURE .THE PEG ON THE SUPPORT TABLE IS MOVABLE
TO ALLOW MAXIMUM USE OF CARBON PAPER DISC. SUPPLIED WITH
90 METER ROLL OF TAPE AND CARBON PAPER DISCS. THE TICKER
TAPE TIMER PRODUCES DOTS SPACED AT 1/50 OR 1/60 SEC INTERVALS
DEPENDING ON MAIN FREQUENCY .ADDITIONAL BONUS WITH EXTRA
GUIDES
ACCOMODATES 4.5 MM EXTERNAL DIAMETER RUBBER TUBING FOR
THE
' PEARLS IN AIR ' WATER DROP EXPERIMENT.
POWER SUPPLY 12 V/ AC . |
| Prod
ID : TTT-A-4122 |
| TICKER TAPE TIMER D.C. |
|
THE DOTS ARE SPACED AT 1/50 SEC .POWER SUPPLY 12V /
D.C. SPARES : TICKER TAPE ,WIDTH 9.5 MM IN ROLLS , 300
M LONG
CARBON DISCS , PACK OF 100 |
| Prod
ID : TTT-D-4123 |
|
|
