|
| [ About Us ]
[ Buisness Terms ]
[ Payment & Terms ]
[ What's New ]
[ Feedback ]
[ Contact Us ]
[ FAQ ] |
|
|
| BATTERY JARS, BOROSILICATE
GLASS |
|
Suitable for making simple cells, cylindrical with ground
edges.
|
HEIGHT , MM |
DIAMETER , MM |
100 |
100 |
150 |
100 |
|
| Prod
ID: BBG-5901 |
| PLATES WITH TERMINAL |
|
For Construction of simple cells
MATERIAL |
DIMENSION , MM |
COPPER |
50 X 2 X 125 |
ZINC |
50 X 2 X 125 |
CARBON |
38 X 10 X 125 |
|
| Prod
ID: PWT-5902 |
| LEAD PLATES |
|
| Plates 150 X 75 X 3 MM to demonstrate
the principle of the lead acid accumulator, pair comprises
one plate with black and one with red 4 MM socket terminals. |
| Prod
ID: BBG-5903 |
| SIMPLE CELL |
|
Consists of one Copper, one
Zinc plate with terminals and a glass jar
|
| Prod
ID: PWT-5904 |
| DANIELL CELL |
|
| Comprises a copper vessel,
with terminals and perforated shelf, thick zinc rod with
brass terminals and porous pot capacity pot, capacity
600 ml |
| Prod
ID: BBG-5905 |
| LECLANCHE CELL |
|
E.M.F. approximately 1.5 V
comprises polythene container, the rim is shaped to accomodate
the cathode, A Zinc rod with terminals sealed in a porous
pot containing mixture of carbon and manganese dioxide
depolarizer. Requires approx 500 ml ammonium chloride
electrolyte with zinc rod and porous pot supplied without
electrolyte.
|
| Prod
ID: PWT-5906 |
| CONDUCTIVITY APPARATUS
|
|
Titration flask, 100 ML with
two holes rubber stopper fitted near the base to hold
carbon electrodes. Especially use fully when the solution
has to be shaken during titration. Complete with carbon
electrodes, W-Tube, Glass for migrations of ions, U-Tube,
Glass for variation of ion migration rate.
|
| Prod
ID: BBG-5907 |
| ELECTROLYSIS CELLS |
|
Each cell consists of a glass
cylinder, the lower end of which accommodates a tight-fitting
rubber stopper fitted with Z Carbon electrodes. Contact
of each electrode made throught a crocodile clip, accidental
shot circuting of the electrodes is prevented by a strip
of insulating material set into the rubber between the
electrodes by means of a wood strip and rubber bands.
|
| Prod
ID: PWT-5908 |
| HOFFMANN VOLTAMETER |
|
To demonstrate water decomposition
by electrolysis and with applications in the evaluation
of the electro chemical equivalent of hydrogen. For electrolysis
of water, platinum electrodes are used; For electrolysis
of ammonia or hydrochloric acid, Carbon electrodes are
used. The electrodes are mounted in rubber stoppers for
insertion into open ends of voltameter limbs. The glass
unit has two connected limbs capacity 50 ml, Integral
with reservoir tube and funnel shaped bulb, with a stop
clock at the top of each limb. Electrodes available seperately.
|
| Prod
ID: BBG-5909 |
| VOLTAMETER |
|
Glass cup form with platinum
electrodes in stem with connecting wires connected to
two two terminals fitted on wooden base with two graduated
test table and holder to support them.
|
| Prod
ID: PWT-5910 |
| COPPER VOLTAMETER |
|
For experiments in electrolysis
consists of 3 copper plates forming the cathode are suspended
from bakelite cover in a glass jar 150 X 100MM (H x D).
The outer plates forms anode and the centre one is cathode.
|
| Prod
ID: BBG-5911 |
| ATOMIC MODEL SET |
|
Senior Set
Junior Set
|
| Prod
ID: PWT-5912 |
| CRYSTAL MODEL SET |
|
For experiments in electrolysis
consists of 3 copper plates forming the cathode are suspended
from bakelite cover in a glass jar 150 X 100MM (H x D).
The outer plates forms anode and the centre one is cathode.
|
| Prod
ID: BBG-5913 |
|
|
|
| Copyright © Lab & General Exports Pvt. Ltd. |
Designed by Netra Delphic Pvt Ltd. |
|
